DIPON LuminaCast 6 Art Flow Epoxy Resin -3 kg

High-viscosity epoxy resin for controlled movement, detailed effects and smooth, glossy finishes.

DIPON LuminaCast 6 Art Flow is designed for resin artists, makers and creative users who want greater control over colours, pigments and decorative effects. Its thicker consistency moves more slowly than standard casting resin, helping patterns retain their shape without spreading too quickly.

Choose Art Flow When You Need

• Greater control over colour and pigment movement
• Defined geode, floral and abstract effects
• A thicker resin for canvas and surface artwork
• A smooth, glossy coating for decorative surfaces
• Diamond-clear transparency with UV stabilisation
• A professional finish for artwork, trays and creative projects

Why Choose LuminaCast 6 Art Flow?

The high-viscosity formulation gives you more time and control when spreading, directing and shaping the resin. Colours remain better separated, while lines and decorative effects maintain greater definition.

Once cured, the resin creates a smooth, glossy and highly transparent surface. UV absorbers and HALS additives help reduce yellowing and preserve clarity for longer.

Ideal Applications

• Resin art and resin painting
• Geode artwork
• Floral and controlled-flow effects
• Canvas coatings
• Worktop and tabletop coatings
• Trays and decorative surfaces
• Surface sealing and protective finishing

Choose Another Resin When

• You need to cast more than 20 mm in a single layer
• The resin must flow into very fine mould details
• You need a dedicated primer for highly absorbent wood

Quick Specifications

• Mixing ratio: 2:1 by weight
• Recommended layer thickness: 1–20 mm at 20°C
• Working time: Approximately 45–50 minutes
• Demoulding time: Approximately 16–24 hours at 23°C for a 20 mm layer
• Next layer: Approximately 12–16 hours at 20°C
• Finish: Diamond-clear and high gloss
• Viscosity: High viscosity with controlled movement
• UV protection: UV absorbers and HALS additives

Mixing Instructions

Accurately weigh two parts of Component A and one part of Component B. Mix slowly for three to four minutes while carefully scraping the sides and bottom of the container.

Transfer the mixture into a second clean container and mix again for another three to four minutes. This double-mixing method helps prevent unmixed material from remaining around the sides or base of the first container.

Always measure the components by weight rather than volume.

Before You Begin

Bring both components to approximately 20–24°C before mixing and work at a room temperature of approximately 20–25°C. Higher temperatures and larger mixed quantities can shorten the available working time.

Ensure the working surface is clean, dry and free from dust, grease, moisture and loose material before applying the resin.

Safety Information

Wear suitable gloves, eye protection and protective clothing. Work in a well-ventilated area and read the current product instructions and safety data sheets before use.

Although LuminaCast 6 Art Flow contains advanced UV stabilisation, no epoxy resin can be guaranteed to remain completely unaffected by prolonged sunlight or outdoor exposure.