DIPON LuminaCast 5 Radiant Flow Epoxy Resin 3Kg

DIPON LuminaCast 5 Radiant Flow – Crystal-Clear Epoxy Resin for Resin Art & Decorative Casting

DIPON LuminaCast 5 Radiant Flow is a premium, crystal-clear epoxy resin developed for resin artists and makers who need excellent clarity, smooth flow, and reliable results. It is ideal for projects where surface finish, transparency, and working time matter.

Who this resin is for

This product is ideal if you:

• Create resin art, wall art, trays, coasters, and decorative objects
• Work with silicone molds
• Use pigments, mica powders, color pastes, or decorative inclusions
• Need a resin with controlled flow and extended working time

Not recommended if you:

• Need ultra-fast industrial cycle times
• Require very thick single-pour castings beyond the recommended depth

Key performance advantages

• Crystal-clear transparency – highlights pigments and embedded elements
• Balanced viscosity – smooth flow without losing control
• Extended working time – ideal for detailed artistic work
• Self-deaerating formulation – minimizes surface bubbles
• UV-stabilized system – helps reduce yellowing over time

This resin is designed for artists and designers who value aesthetics, precision, and repeatable results.

Technical specifications (at 23°C)

• Mixing ratio: 2:1 by weight (Resin A : Hardener B)
• Working time: approx. 60 minutes (200 g)
• Recommended pour thickness: 1–20 mm per layer
• Demoldable after: approx. 16–24 hours (20 mm)
• Viscosity:
  • Resin A: approx. 730 mPa·s
  • Hardener B: approx. 1330 mPa·s

Compatible materials & applications

Suitable for use with:

• Silicone molds
• Pigments, mica powders, and color pastes
• Decorative inclusions (wood, stone, metal flakes, effects)

Common uses include resin art pieces, decorative panels, coated surfaces, trays, and low-volume design production.

Mixing & use (important)

1. Ensure both components are at 20–24°C before mixing
2. Mix Resin A and Hardener B in a 2:1 ratio by weight
3. Stir thoroughly for 3–4 minutes
4. Transfer to a clean container and mix again briefly
5. Pour slowly into prepared molds or onto surfaces

Maintain a stable ambient temperature of 20–25°C during curing.

Safety & handling

• Wear nitrile gloves and eye protection
• Use in a well-ventilated area
• Accurate mixing is essential for full cure
• Store sealed, away from heat and direct sunlight

Before you buy

If you are unsure whether LuminaCast 5 Radiant Flow is the right epoxy for your project, contact us before ordering. Choosing the correct resin saves time, material, and cost.

Why buy from EltoBert Studio

• Locally stocked and supported
• Used by real resin artists and makers
• Honest guidance, not guesswork

Professional material for serious results.