{"product_id":"luminacast-3-crystal-flow-epoxy-resin-3kg","title":"DIPON LuminaCast 3 Crystal Flow Epoxy Resin - 3 kg","description":"\u003ch2\u003eDIPON® LuminaCast 3 Crystal Flow Epoxy Resin – 3 kg\u003c\/h2\u003e\n\n\u003cp\u003eLuminaCast 3 Crystal Flow is a highly transparent, low-viscosity epoxy resin developed for detailed moulds, decorative castings and clear resin artwork between 1 mm and 10 mm.\u003c\/p\u003e\n\n\u003cp\u003eIts excellent flow allows the resin to reach narrow spaces and fine mould details, making it a practical choice for jewellery, pendants, coasters, trays, encapsulations and layered decorative work.\u003c\/p\u003e\n\n\u003cp\u003eThe formula is self-deaerating and contains UV absorbers and light stabilisers to help minimise bubbles and slow down yellowing. As with every epoxy resin, prolonged exposure to sunlight and heat should still be avoided where maximum clarity is required.\u003c\/p\u003e\n\n\u003ch3\u003eChoose This Resin When You Need\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eA highly transparent resin for detailed decorative castings\u003c\/li\u003e\n\u003cli\u003eVery low viscosity that flows easily into fine mould details\u003c\/li\u003e\n\u003cli\u003eControlled casting layers between 1 mm and 10 mm\u003c\/li\u003e\n\u003cli\u003eA smooth, glossy finish for clear or pigmented projects\u003c\/li\u003e\n\u003cli\u003eApproximately 35 minutes of working time for a 200 g mixture at 23°C\u003c\/li\u003e\n\u003cli\u003eA resin suitable for jewellery, coasters, trays and transparent embedding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Makes Crystal Flow Different?\u003c\/h3\u003e\n\n\u003cp\u003eLuminaCast 3 uses a particularly low-viscosity hardener. This helps the mixed resin move freely through intricate moulds, around small inclusions and across detailed surfaces.\u003c\/p\u003e\n\n\u003cp\u003eIts self-deaerating formulation helps trapped air rise from the mixture, while the UV absorbers and light stabilisers improve resistance to yellowing. Careful mixing and suitable working conditions remain essential for achieving clean results.\u003c\/p\u003e\n\n\u003cp\u003eThe resin is solvent-free and cures to a hard, glossy finish with a final hardness of approximately Shore D81 after seven days at 23°C.\u003c\/p\u003e\n\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eResin jewellery and pendants\u003c\/li\u003e\n\u003cli\u003eSilicone mould castings\u003c\/li\u003e\n\u003cli\u003eCoasters and decorative trays\u003c\/li\u003e\n\u003cli\u003eClear encapsulations and inclusions\u003c\/li\u003e\n\u003cli\u003eSmall decorative objects\u003c\/li\u003e\n\u003cli\u003eLayered resin artwork\u003c\/li\u003e\n\u003cli\u003eGlass-fibre and carbon-fibre laminates\u003c\/li\u003e\n\u003cli\u003eTransparent and pigmented creative designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatible Materials and Products\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSuitable silicone moulds\u003c\/li\u003e\n\u003cli\u003eDIPON® mica and effect pigments\u003c\/li\u003e\n\u003cli\u003eTransparent resin dyes and compatible colourants\u003c\/li\u003e\n\u003cli\u003eDry decorative inclusions\u003c\/li\u003e\n\u003cli\u003eGlass and carbon-fibre reinforcement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlways test pigments, colourants and inclusions on a small quantity first. Moisture in moulds, wood, flowers or other inclusions can cause cloudiness, bubbles or curing problems.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to Choose Another Resin\u003c\/h3\u003e\n\n\u003cp\u003eChoose LuminaCast 2 Coaster Cast when you want a slightly thicker resin with more control for coasters, embeddings and mould work.\u003c\/p\u003e\n\n\u003cp\u003eChoose LuminaCast 4 Gem Flow or another suitable LuminaCast formulation when you require a higher viscosity or a casting layer beyond 10 mm.\u003c\/p\u003e\n\n\u003cp\u003eFor river tables, lamps and other deep castings, choose EpoxyPlast 3D B50 Deep Pour or another resin specifically designed for the required casting depth. Do not use Crystal Flow for a single pour exceeding 10 mm.\u003c\/p\u003e\n\n\u003ch3\u003eQuick Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack size:\u003c\/strong\u003e 3 kg total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 2:1 by weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin and hardener ratio:\u003c\/strong\u003e 100 parts A to 50 parts B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time:\u003c\/strong\u003e Approximately 35 minutes at 23°C for a 200 g mixture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended casting thickness:\u003c\/strong\u003e 1 mm to 10 mm at 20°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended material temperature:\u003c\/strong\u003e 20°C to 24°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended ambient temperature:\u003c\/strong\u003e 20°C to 25°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended minimum mixed quantity:\u003c\/strong\u003e 90 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemoulding time:\u003c\/strong\u003e Approximately 16 to 24 hours at 23°C for 5–10 mm castings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNext layer:\u003c\/strong\u003e Approximately 10 to 12 hours at 20°C for a 10 mm layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSanding:\u003c\/strong\u003e Approximately 5 to 7 days at 23°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal hardness:\u003c\/strong\u003e Approximately Shore D81 after seven days at 23°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-deflection temperature:\u003c\/strong\u003e Approximately 68°C after complete curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Highly transparent and glossy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormulation:\u003c\/strong\u003e Solvent-free, self-deaerating and UV-stabilised\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMixing Instructions\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBring both components and the working area to the recommended temperature before mixing.\u003c\/li\u003e\n\u003cli\u003eUsing an accurate digital scale, weigh two parts Resin A to one part Hardener B.\u003c\/li\u003e\n\u003cli\u003eMeasure the ratio by weight only. Do not measure it by volume or alter the ratio.\u003c\/li\u003e\n\u003cli\u003eMix slowly and thoroughly for 3 to 4 minutes at no more than approximately 300 rpm.\u003c\/li\u003e\n\u003cli\u003eScrape the sides and bottom of the container while mixing.\u003c\/li\u003e\n\u003cli\u003eTransfer the mixture into a second clean container.\u003c\/li\u003e\n\u003cli\u003eMix again for another 3 to 4 minutes to produce a homogeneous mixture.\u003c\/li\u003e\n\u003cli\u003ePour within the available working time and do not exceed a casting thickness of 10 mm per layer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePreparation and Application Notes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse clean, dry and contamination-free tools, moulds and inclusions.\u003c\/li\u003e\n\u003cli\u003eDo not mix directly inside the original resin or hardener bottles.\u003c\/li\u003e\n\u003cli\u003eMix slowly to avoid introducing unnecessary air into the resin.\u003c\/li\u003e\n\u003cli\u003eDo not scrape unmixed material from the first container directly into the final project.\u003c\/li\u003e\n\u003cli\u003eHigher temperatures and larger mixed quantities accelerate the reaction and shorten the available working time.\u003c\/li\u003e\n\u003cli\u003eLower temperatures can increase viscosity and extend curing time.\u003c\/li\u003e\n\u003cli\u003eNever leave a large mixed quantity sitting inside a deep mixing container because epoxy generates heat as it reacts.\u003c\/li\u003e\n\u003cli\u003eFor multiple layers, follow the recommended recoating time or prepare the cured surface correctly before applying another layer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCuring and Finishing\u003c\/h3\u003e\n\n\u003cp\u003eProtect the casting from dust, moisture and movement while it cures. Demoulding time is approximately 16 to 24 hours under the stated conditions, but the piece will continue developing its final properties afterwards.\u003c\/p\u003e\n\n\u003cp\u003eAllow approximately five to seven days at 23°C before sanding or subjecting the finished piece to demanding use. Cooler conditions or variations in casting thickness may extend these times.\u003c\/p\u003e\n\n\u003ch3\u003eSafety Information\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRead the product label, technical information and safety data sheets before use.\u003c\/li\u003e\n\u003cli\u003eWear suitable chemical-resistant gloves, protective clothing and eye protection.\u003c\/li\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eAvoid skin and eye contact and do not inhale vapours or sanding dust.\u003c\/li\u003e\n\u003cli\u003eKeep the product away from children and pets.\u003c\/li\u003e\n\u003cli\u003eDo not pour uncured resin or hardener into drains.\u003c\/li\u003e\n\u003cli\u003eDispose of unused material and contaminated packaging according to local requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese instructions do not replace the manufacturer’s technical information or safety data sheets.\u003c\/p\u003e\n\n\u003ch3\u003eSelected by EltoBert Studio\u003c\/h3\u003e\n\n\u003cp\u003eEltoBert Studio supplies carefully selected epoxy resins, pigments, mould-making materials and creative accessories for artists, makers and professional workshops. As an official DIPON® distributor in Malta, we help customers select the correct resin and working method for each application.\u003c\/p\u003e","brand":"Dipon","offers":[{"title":"Default Title","offer_id":49055023923534,"sku":"LUMINA3","price":64.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/5515\/1182\/files\/luminacast-3-crystal-flow-epoxidharz-molds-diponr.jpg?v=1777141348","url":"https:\/\/eltobertstudio.com\/products\/luminacast-3-crystal-flow-epoxy-resin-3kg","provider":"EltoBertStudio","version":"1.0","type":"link"}